December 14, 2012
Inspired by the many amazing mitten garlands I've seen popping up on the web this holiday season, I was inspired to put my spin on the idea! I've mentioned this before, but my grandmother recently moved into a new home and I've done my best to send her seasonal decorations whenever possible. With that in mind, I created this Felt Mitten Hanging for her new digs.
1. I started with some felt that was seasonally appropriate, but also coordinated with her existed decor. Then I sketched a mitten shape on a piece of paper, which I used as a template.
2. I cut out my paper template pieces, and pinned them onto the felt. Once everything was pinned, I cut out the shapes I needed.
3. Since I sometimes have a hard time keeping track of "artistic plans" when I'm in the middle of a project, I sometimes sketch the plan on a piece of scrap paper... and this project was no different!
4. After a bit of cutting, I had all the pieces I needed for my hanging.
5. So it was time to assemble! I'm a HUGE fan of Tacky Glue, and it was a perfect tool for this project! I just squeezed a bit of glue where I planned to attach the mitten pieces, spread it around with my fingertip, and assemble the mitten pieces.
6. Since I'm not sure how my grandmother will use this hanging, I wanted to make sure that the mittens didn't just hang limply wherever she ends up putting it... so I used the most unfortunately names Mod Podge product: Stiffy.
7. Stiffy is a liquid that you can paint on fabric/fiber surfaces that dries and provides extra stiffness in your project. I chose to brush a liberal amount onto the backs of the mittens to ensure that the mittens would hang nicely (and not bend/wrinkle, etc.).
8. Once the mittens had dried completely (both the glue and the stiffy), It was time to assemble them. To do so, I ran a line of glue along the back of the mitten, laid a long piece of yarn into the glue, and covered it up with a scrap of coordinating felt.
And once everything had dried, my hanging was complete.
I think this seasonal little project turned out well, and I think it will add a nice touch to my grandmother's new place!!
FELT MITTEN HANGING SUPPLY LIST
Glue (I used Tacky Glue)
December 12, 2012
When you were a kid, did you ever make potato-print pictures? Well, here's a way to use those childhood skills to make Potato Print Wrapping Paper.
1. Like most of my projects, you only need a few supplies: paint, kraft paper, and a potato.
2. To make the potato stamps, I cut up my potato into a simple shape using a paring knife. I wanted my paper to have a graphic element, so I cut the potato into two triangles.
3. Then I taped down my piece of kraft paper (so it wouldn't curl up around the edges)...
4. And started stamping.
And in not time at all, I had covered my piece of kraft paper with painted shapes.
Of course, a little piece of paper wasn't going cover all of my holiday gifts, so I rolled out some more paper and just kept stamping.
And after the paint had dried, I used the paper to wrap some presents and finished the look with a bit of twine. Simple, right?
I love the rustic nature of the project, and it is incredible versatile since you can cut/carve potatoes into whatever shape you want!
POTATO PRINT WRAPPING PAPER SUPPLY LIST
Painter's tape (to keep the paper from curling when you stamp it)
December 10, 2012
I love collecting vintage items and antiques... but since I live in NYC, I have very little space to keep them. With that in mind, I try to repurpose my found treasures whenever possible, which is how I came up with this Vintage Pan Memo Board.
Here is the awesome pan that instigated the whole project: it's this great, enamelware pan with a blue rim... so pretty!
This project was insanely easy, thanks to 3M's Command Strips.
I used 4 pairs of heavy-duty strips and applied them to the back of the pan.
Following the directions on the package, I applied my pan to the wall, where it has been every since! I decided to put the pan just next to my front door where, thanks to come magnets, I can hang my keys, a flashlight, and other important things I might need. So there you have it- a very easy way to transform a pan into a memo board!
December 7, 2012
With Christmas just around the corner, I've been stealing moments here and there to get my house and office decorated for the holiday! With that in mind, the other day I whipped up a few Doorknob Jingle Bells. I've always loved the phrase "every time a bell rings an angel gets his wings" from It's a Wonderful Life, and by including bells on doorknobs (which are constantly opening and shutting everyday), I can ensure that a whole heavenly choir earns their wings on a daily basis!
My supplies for this project were really simple: just some red yarn I had in my stash and a handful of jingle bells.
As usual, I didn't use a pattern for this project, so bear with me as I try to describe what I did! I started with a chain of 9, then I single crocheted 3 more rows of 8 stitches.
Then it was time to add my bells! I wanted my bells to be in the middle of my circle so they'd jingle around the edge of my eventual project, so I decided to attach them on the fifth stitch of the row. So I inserted my hook into the project, but before I grabbed the yarn to continue the stitch, I slipped a bell onto the loop of yarn. Then I pretend like the bell wasn't there and just continued the stitch and finished the row.
I did that same thing 9-10 times, until I had a little swath of crochet with a row of bells.
Next, I folded the project in half (so the bells were on the outisde), and using a single crochet stitch I fastened the sides of my swath together.
When that was finished, using a long piece of yarn I quickly sewed the two remaining ends together to create a circle.
And that was all it took to make a Doorknob Jingle Bell. This took about 30-40 minutes to make, so I was able to knock out a couple while catching up on TV the other night!
DOORKNOB JINGLE BELL SUPPLY LIST
December 5, 2012
In our family it is a tradition to have baskets of nuts available for guests to enjoy. Truth be told, I never really liked eating the nuts, but cracking them was a whole other story! Lucky for me, I had a very loving grandfather who would eat whatever nuts I would crack open, so I have fond memories that involve mixed nuts and the holidays.
Nowadays, while I don't like to eat the nuts, I still like to incorporate them into my holiday decorations! So the other day, I whipped up this Nut Garland.
The whole project was really simple! I started with a bunch of nuts I picked up at my local grocery. These particular nuts (walnuts, almonds and filberts) are sold by the pound, so they're pretty inexpensive!
Then I grabbed my drill, a cheap cutting board* I got at the Dollar Store, and I got to work. This probably wasn't the safest way to do it, but I held a nut in one hand, and using the drill in my other hand, drilled a hole through each nut. I used the drill on top of the cheap-o cutting board since I didn't want to drill too far and gouge my counter top.
*Most people would probably have a piece of scrap wood in the garage they could use instead, but since I live in a tiny NYC apartment and don't have a stash of scrap wood lying around, I ruined a very inexpensive cutting board!
After a lot of drilling, a few split nuts, and a couple thumb scrapes (thanks to a slip of the drill), all of my nuts were hole-y!
So I grabbed a tapestry needle, some brown embroidery floss, and strung the nuts!
See? I must admit, when I first envisioned this project I had planned to string the nuts and then lay them amongst the candles on the table in a wintry centerpiece: I thought the winding line of nuts would look really cool and would be way easier to deal with than a bowl full of loose nuts piled all over the place. However, once the nuts were on the string I became a little obsessed with hanging the nuts somewhere!
So I decided to leave a few inches of floss at each end of the garland and I tied a simple loop in each end since I thought it might make it easier to hang/use in the future.
This garland can be used for anything, really! Ultimately, I'm going to try winding mine around a mini Christmas tree. However, like any good crafter, I finished my garland before I managed to purchase said Christmas tree, so for the moment the nuts are hanging from some sconces to keep them untangled. Don't worry, this is only a temporary solution... I think...
All in all, I'm pleased to say that this is a really simple and inexpensive project that adds a bit of family tradition to my holiday in a new way- I can't wait to add them to my tree!
NUT GARLAND SUPPLY LIST
December 3, 2012
Now that Christmas is just a few weeks away, I can officially start getting ready for the holiday! I spent the weekend tackling little projects that I've been looking forward to, including these Cinnamon Gift Tags and Ornaments. I'm sure you've seen these before - they're like cinnamon cookies that you don't eat, but they last forever and smell delicious!
1. Admittedly, I hadn't made these cinnamon ornaments/tags before, so after some Internet research I found a recipe that seemed ideal: cinnamon (of course), ground cloves, ground nutmeg, applesauce (really?!) and glue (I don't have white glue lying around, I I substituted with some modge podge). If you want the exact recipe, I've included it below!
2. According to the recipe, I measured all the ingredients and poured them into an old bowl. I was a little nervous that the project woudn't clean up well, so I used old utensils, etc.... but I was pleased to learn that everything cleaned up without an issue- what a relief!
3. After a bit of mixing (I found it was easier to just use my hands), the dough came together.
4. So I sprinkled some cinnamon on my counter top, and prepared to roll out the dough with a rolling pin.
Once the dough was an even thickness, I cut out my ornament and tags using a cookie cutter. I wanted some of my holiday gifts/decorations this year to represent my Swedish heritage, so I used a Dala Horse cookie cutter.
And in order to make the holes for my ornaments/tags, I used a plain, ol' drinking straw to punch holes in the dough.
In no time at all, I had cut all the dough and put it on cookie sheets lined with foil. Then I placed the pans in a warm oven for several hours to dry out.
Once they were dry (and my apartment smelled amazing), I couldn't wait to see how my tags/ornaments had turned out.
I grabbed some ribbon to hang the ornaments...
This was a really fun and easy project that I hope will become an annual tradition! And since all of the ingredients were so inexpensive, I can certainly afford to make a few more batches... maybe even this year!
Non-Edible Cinnamon Ornament/Tag Recipe
-1 cup cinnamon
-1 tablespoon ground cloves
-1 tablespoon ground nutmeg
-3/4 cup applesauce
-2 tablespoons glue (or in my case, modge podge)
CINNAMON GIFT TAGS AND ORNAMENTS SUPPLY LIST
Non-Edible Cinnamon dough (see above for recipe)